+86 13722725788 527312202@QQ.COM

 名称 NAME:锻制承插45度湾头 FORGED 45° SOCKET WELDED ELBOW
 材质 MATERIAL：A105.A420-WPL6.A234-WP5,A234-WP9,A234-WP11,A234-WP12,A234-WP91.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L,A694-F42,A694-46,A694-F48,A694-F50,A694-F52,A694-F56,A694-F60,A694-F70,A694-F80
 尺寸 SIZE：1/8"-3",DN6-DN80
 PRESSURE：3000LB,Sch80
 STANDARDS： ISO, ANSI. JIS . DIN GB/T14383,GB/T14626,ASME B16.11,
 SH3409,HGJ10,HGJ529,MSS SP-43,MSS SP-83,MSS SP-97
 USE： Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 
45°  SOCKET ELBOW
产品结构示意图该 PRODUCT CONSTRUCTION

 名称 NAME:锻制承插90度弯头 90° SOCKET WELDED ELBOW
 材质 MATERIAL：A105.A420-WPL6.A234-WP5,A234-WP9,A234-WP11,A234-WP12,A234-WP91.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L,A694-F42,A694-46,A694-F48,A694-F50,A694-F52,A694-F56,A694-F60,A694-F70,A694-F80
 尺寸 SIZE：1/8"-3",DN6-DN80
 PRESSURE：3000LB,Sch80
 STANDARDS： ISO, ANSI. JIS . DIN GB/T14383,GB/T14626,ASME B16.11,
 SH3409,HGJ10,HGJ529,MSS SP-43,MSS SP-83,MSS SP-97
 USE： Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 

90°  SOCKET ELBOW
产品结构示意图该 PRODUCT CONSTRUCTION

Nominal Pipe
Size
Depth of Socket
Dimension of Socket
Wall Thickness
Center to Bottom of Socket
A
Cmin 90°Elbows 45°Elbows
DN NPS Jmin d1 3000LB
Sch80		 6000LB
Sch160		 9000LB
XXS		 3000LB
Sch80		 6000LB
Sch160		 9000LB
XXS		 3000LB
Sch80		 6000LB
Sch160		 9000LB
XXS
6 1/8 10 10.7 3.2 3.5
-
 11 11 - 8 8 -
8 1/4 10 14.1 3.3 4.0 - 11 15 - 8 8 -
10 3/8 10 17.5 3.5 4.4 - 13 15 - 8 12 -
15 1/2 10 21.8 4.1 5.2 8.2 16 19 25 11 13 16
20 3/4 13 27.4 4.3 6.1 8.6 19 22 28 13 14 18
25 1 13 34.2 5.0 7.0 10.0 22 27 32 14 18 22
32 11/4 13 42.9 5.3 7.0 10.6 27 32 35 18 21 22
40 11/2 13 48.3 5.6 7.8 11.2 32 38 38 21 25 25
50 2 13 61.1 6.1 9.5 12.2 38 41 41 25 29 29
65 21/2 16 76.9(73.8) 7.7 12.5 - 41 57 - 29 32 -
80 3 16 89.8 8.3 13.8
-
 57 64 - 32 35 -
100 4 19 115.5 9.4 -
-
 66 - - 42 - -

1,WHAT ARE GIVEN IN THIS TABLE LIST ARE THE SAME PART SIZE OF VARIOUS SOCKET PIPE FITTINGS FOR CORRESPONDING STANDARDS.
2,3000,6000,9000 ARE PRESSURE GRADE CODE, LB/in. IS THE UNIT. sch80,sch160,XXS ARE WALL THICKNESS CODE. 
3,45°ELBOW AND 90°ELBOW ARE REDUCING, FLOW APERTURE DIMENSION d2 SMALLER THAN THE CORRESPONDING NOMINAL PIPE d2.
4,WALL THICKNESS Cmin  IS THE MINIMUM OF ANY POINT。
5,THE REDUCING PIPE FITTINGS: THE LENGTH A BETWEEN THE CENTER OF NARROW END AND  THE BOTTOM OF DIMENSION OF SOCKET EQUALS TO THE OPENER END A.
6,ACCORDING TO THE CLIENTS' REQUIREMENT， THE SOCKET PIPE FITTINGS ALSO CAN BE MADE WITH THREAD

PRESSURE GRADE TABLE OF THE SOCKET PIPE FITTINGS
THE WALL THICKNESS TABLE OF THE SMALL END DIAMETER
THE TABLE OF DIMENSION OF SOCKET
THE TOLERANCE LIMITS TABLE OF SOCKET PIPE FITTINGS